• Home
    Home This is where you can find all the blog posts throughout the site.
  • Categories
    Categories Displays a list of categories from this blog.
  • Tags
    Tags Displays a list of tags that have been used in the blog.
  • Bloggers
    Bloggers Search for your favorite blogger from this site.
  • Team Blogs
    Team Blogs Find your favorite team blogs here.
  • Login
    Login Login form

How to fit the RS-tor

Posted by on in News
  • Font size: Larger Smaller
  • Hits: 4053
  • Subscribe to this entry
  • Print

We get many questions about fitting the RS-tor - here are the key points to follow:


1) Remove your stirrups and attach the RS-tor straps over your stirrup bars.

2) Replace the stirrups & adjust the strap lengths, so the first 'O' ring sits centrally.




1) When seated and holding the RS-tor handle, hold your arm horizontally in any direction...

2) If the strap is not tight, you must reduce both of the stirrup strap lengths equally.

3) If the strap is not allowing you to straighten your arm, then loosen the stirrup straps.


NOTE: The strap should tension during the last straightening of your arm; this allows you complete natural movement but prevents you from going beyond your natural riding position.


If you are propelled in any direction beyond your natural position, you can lean on or pull the RS-tor handle to restore you to your seated position.


TEST: Once the lengths have been set to your reach, test the RS-tor by leaning forward (as if the horse has bucked) and push your weight onto the RS-tor handle, keeping your arm straight - you should barely move from your saddle, and the recoil of the RS-tor strap will assist you.


Have you seen our new 'How to' video - click on the product video on the home page to see how to fit the RS-tor.

Also visit our page - RS-tor sizes.


Contact Information

Follow Us

Available At

© 2013 RS-tor All Rights Reserved. Website Designed by Akira Studio Ltd.